| Specification | SFC-21-5CV | SFC-21-7CV | |
|---|---|---|---|
| GENERAL | General Type | Heavy-duty industrial/commercial | Heavy-duty industrial/commercial |
| Brand | Kohler®Command PRO® | Kohler®Command PRO® | |
| Model | CV173 | CV224 | |
| Horsepower | 5HP @ 3300 RPM | 7HP @ 3300 RPM | |
| Type | 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft engine | 4 cycle gas, OHV, air-cooled, single-cylinder, vertical shaft engine | |
| Displacement | 173 cc | 224 cc | |
| Cylinder | One with cast-iron cylinder bore | One with cast-iron cylinder bore | |
| Governor | Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm | Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm | |
| Air Cleaner | Quad-Clean™ four-stage, cyclonic air filter | Quad-Clean™ four-stage, cyclonic air filter | |
| Exhaust | Side discharge muffler with guard | Front discharge muffler with guard | |
| Oil Pump Group | Steel oil pump; Full pressure lubrication with spin-on oil filter | Steel oil pump; Full pressure lubrication with spin-on oil filter | |
| Starter/Electrical | Easy-Pull™ recoil start | Easy-Pull™ recoil start | |
| 50-State Compliant | Yes | ||
| ENGINE DECK | Thickness | 14 gauge | 14 gauge |
| Fuel Tank | 0.37 gallon (1.4 liters) plastic tank | 1 gallon (3.785 liters) plastic tank | |
| Wheels/Tires | Drive: 10.5 x 3 / Front: 9 x 2.25 | Drive: 10.5 x 3 / Front: 9 x 2.25 | |
| Handle Bars | 1″ diameter, thick wall tubing, 3-position adjustable | 1″ diameter, thick wall tubing, 3-position adjustable | |
| DRIVE SYSTEM | Type | Transmission | Transmission |
| Transmission | GT MG 512 transmission, 3-speed | GT MG 512 transmission, 3-speed | |
| Steering/Travel Control | Variable drive control bar and 3-speed selector lever on handlebar | Variable drive control bar and 3-speed selector lever on handlebar | |
| Transmission Output Shaft | 0.50″ diameter | 0.50″ diameter | |
| Safety Group | Handle actuated operator presence system | Handle actuated operator presence system | |
| Forward Speed | Up to 4.25 mph | Up to 4.25 mph | |
| CUTTER DECK | Type | High-vacuum, high-capacity design | High-vacuum, high-capacity design |
| Construction | 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped. | 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped. | |
| True Cutting Width | 21 inches (53.34 cm) | 21 inches (53.34 cm) | |
| Cutting Height Adjustment | 1.5″ to 4.5″ in 0.5″ increments | 1.5″ to 4.5″ in 0.5″ increments | |
| Cutter Blade | 0.1345 in. thick, milled edge, wear resistant | 0.1345 in. thick, milled edge, wear resistant | |
| Blade Engagement | Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade. | Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade. | |
| Discharge Opening | Rear-discharge. Extra wide discharge opening. | Rear-discharge. Extra wide discharge opening. | |
| Clutch Type | Heavy-duty Blade Brake Clutch (BBC) | Heavy-duty Blade Brake Clutch (BBC) | |
| OPTIONAL ITEMS/ATTACHMENTS | Mulching Plug | Included | Included |
| Fabric Grass Catcher | Included; 2.2 bushels (2.74 cu. ft.) | Included; 2.2 bushels (2.74 cu. ft.) | |
| Side-Discharge Adapter | Available accessory | Available access |
Similar Products
SWZT Hydro-Drive
Call for Pricing
GENERAL
Total Fuel Capacity
5.5 gallons
Drive Tires
18" x 6.5...
SWZ Hydro-Drive
Call for Pricing
GENERAL
Total Fuel Capacity
5.5 gallons
Drive Tires
16" x 6.5...
SW Belt-Drive
Call for Pricing
GENERAL
Total Fuel Capacity
5.5 gallons
Drive Tires
13" x 5̸...
SFC-30
Call for Pricing
GENERAL
Total Fuel Capacity
1 gallon (0.37 gallon capacity for Cali...